IRON & STEEL SUPPLY / RAIPUR, CHHATTISGARHCall us: +91 88714 63799
FRAMES & FABRICATION / RAIPUR

MS Square Tubes

Clean sections. Solid possibilities.

Illustrative MS Square Pipe product photograph
HARIOM ENTERPRISES / PRODUCT RANGE

MS Square Tubes
for your next project.

Square steel hollow sections are used in fabricated frames, gates, furniture and structural assemblies. Specify the outside dimensions, wall thickness, length, grade and finish, with drawings where the section forms part of a designed structure.

Square hollow sections for fabrication and framing

Square tubes provide a closed section that is convenient for frames, gates and furniture assemblies. For structural work, use the dimensions, grade and connection details specified by your designer. Share your cutting lengths and delivery location with Hariom Enterprises for a supply quotation.

Product specifications

MS Square Pipe specification guide
Product form Square or rectangular hollow section
Material / condition Steel
Supplier-stated square range 20 × 20 mm–150 × 150 mm; confirm wall thickness and length.
Supplier-stated rectangular range 40 × 20 mm–200 × 100 mm; confirm wall thickness and length.
Referenced standard IS 4923:2017 — confirm applicable edition and certification for the order.
Grades for enquiry YSt 210, YSt 240, YSt 310, YSt 355 — confirm grade/standard pairing and mill test certificate with quotation.
Dimensions to specify Outside width × height × wall thickness (mm)
Length / order details Required tube lengths and cutting requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Let’s talk about your requirement.

Request a quote
SUPPLIER-STATED PIPE RANGE

Sizes. Standards. Grades.

The following range is supplied by Hariom Enterprises for quotation enquiries. Confirm size, wall thickness, length and grade availability for your order.

Pipe and hollow-section range
Section Range Referenced standard
Circular hollow section 15 NB–175 NB IS 1161:2014
Square hollow section 20 × 20 mm–150 × 150 mm IS 4923:2017
Rectangular hollow section 40 × 20 mm–200 × 100 mm IS 4923:2017

Grades for enquiry: YSt 210, YSt 240, YSt 310 and YSt 355.

NB means nominal bore; use actual outside diameter and wall thickness for weight calculations. The supplied ranges do not specify every intermediate size or wall thickness. Confirm the grade/standard pairing, applicable standard edition and mill test certificate before ordering; this listing does not establish certification.

Request a pipe quotation
Chat with us