Gate Channel
Gate channels are steel profiles used in gate frames, guides
and related fabrication assemblies. Send the profile drawing
or cross-section, dimensions, thickness and length, including
the intended gate arrangement and finish requirements.
Product specifications
Gate Channel specification guide
| Product form |
Gate channel profile |
| Material / condition |
Steel |
| Dimensions to specify |
Profile width, depth and thickness (mm) |
| Length / order details |
Profile drawing, required lengths and finish |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
Z Angle
Z-shaped steel profiles are used where an offset section is
required for framing, supports or fabrication. Confirm the
profile geometry with a drawing, along with thickness, grade,
length and any coating requirements.
Product specifications
Z Angle specification guide
| Product form |
Z-shaped section |
| Material / condition |
Steel |
| Dimensions to specify |
Flange dimensions, depth and thickness (mm) |
| Length / order details |
Drawing-defined geometry and required lengths |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
T Angle
T-shaped steel sections are used for framing, stiffeners,
supports and general fabrication. Specify the flange width,
section depth, web and flange thickness, length and grade, or
share the required section drawing.
Product specifications
T Angle specification guide
| Product form |
T-shaped section |
| Material / condition |
Steel |
| Dimensions to specify |
Flange width, depth and web/flange thickness (mm)
|
| Length / order details |
Required section lengths and quantity |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
Slotted Angle
Slotted angles have regularly spaced openings for bolted
racks, shelving and light framing assemblies. Enquire with the
leg dimensions, thickness, slot pattern, finish and length;
loading and bracing should follow the assembly design.
Product specifications
Slotted Angle specification guide
| Product form |
Perforated L-shaped section |
| Material / condition |
Steel |
| Dimensions to specify |
Leg dimensions × thickness; slot size and spacing
(mm)
|
| Length / order details |
Required length and slot pattern; use the assembly
design
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
MS Flat
Mild steel flat bars have a rectangular cross-section suited
to straps, brackets, grills and general fabrication. Share the
width, thickness, length, grade and quantity, plus any cutting
or finishing requirements.
Product specifications
MS Flat specification guide
| Product form |
Solid rectangular flat bar |
| Material / condition |
Mild steel |
| Dimensions to specify |
Width × thickness (mm) |
| Length / order details |
Required bar length and cutting requirements |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
Bright Bar
Bright bars are finished steel bars used where dimensional
consistency and surface finish matter in machining or
component manufacture. Confirm the steel grade, cross-section,
size, tolerance, length and required finish before ordering.
Product specifications
Bright Bar specification guide
| Product form |
Finished solid bar |
| Material / condition |
Steel; grade and condition to be specified |
| Dimensions to specify |
Shape and diameter, side size or across-flats
dimension (mm)
|
| Length / order details |
Length, dimensional tolerance and surface finish
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
C Purlins
C-shaped steel purlins are used as secondary members in roof
and wall framing. Specify the section depth, flange and lip
dimensions, thickness, grade, coating and hole layout against
the building or support-system design.
Product specifications
C Purlins specification guide
| Product form |
Cold-formed C-shaped purlin |
| Material / condition |
Steel |
| Dimensions to specify |
Depth, flange/lip dimensions and thickness (mm)
|
| Length / order details |
Lengths, hole positions and profile drawing |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
Z Purlins
Z-shaped purlins are used in roof and wall framing, including
designed systems with overlapping joints. Send the section
dimensions, thickness, grade, coating, lengths and punching
details; laps and connections depend on the structural design.
Product specifications
Z Purlins specification guide
| Product form |
Cold-formed Z-shaped purlin |
| Material / condition |
Steel |
| Dimensions to specify |
Depth, flange/lip dimensions and thickness (mm)
|
| Length / order details |
Lengths, punching details and lap requirements from
the design
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
Solar Purlins
Steel purlins and support profiles form part of solar mounting
structures. Enquire using the approved mounting drawing,
section dimensions, thickness, coating, hole pattern and
lengths so material selection follows the site and system
design.
Product specifications
Solar Purlins specification guide
| Product form |
Drawing-defined solar support profile |
| Material / condition |
Steel |
| Dimensions to specify |
Cross-section dimensions, thickness and hole pattern
(mm)
|
| Length / order details |
Approved mounting drawing, lengths and coating
requirements
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.